1. Check that crumb tray is fully seated  - picture on this page

2. Check that the bun chute is properly seated - picture on this page

3. Check belts for looseness and/or tears

Final Step

1. Check fans

• If fan is running - final step

• If fan is not running:

• Use a straw or plastic knife, insert and push fan to break up grease and start fan

• if fan does not start up - final step

1. Turn unit OFF. Turn the On/Off switch located on back of toaster to OFF

2. Unplug unit for 30 seconds
   While unit is unplugged check the pins inside for signs of burning
   If signs of burnings
   Final Step

3. Plug unit back in

4. Turn unit ON. Turn the On/Off switch located on back of toaster to ON 

5. If error is still displaying

Final Step

*See daily cleaning video here to reference how to remove pieces*

1. Turn unit OFF. Turn the On/Off switch located on back of toaster to OFF

2. Depress latch on left side of in-feed conveyor assembly 

3. Gently open enough to retrieve the stuck product

4.  BE CAREFUL NOT TO CONTACT HEATER PLATEN DURING RETRIEVAL, IT WILL BE VERY HOT

5. Gently close the conveyor assembly until latch is closed

6. Turn unit ON. Turn the On/Off switch located on back of toaster to ON 

1. If it is between 7am and 5pm:
   Final Step

2. Outside those hours:
   Final Step