Check Gas Line  is fully secured - picture on this page

If issue persists and:

• Problem is on one vat 

  • Turn off vat and do not use that one vat

  • Final Step

• Problem is on all vats 

  • Final Step

Check power plug behind fryer is secured - picture on this page

Check breakers

If issue persists and:

• Problem is on one vat 

  1. Turn off vat and do not use that one vat

  2. Final Step

• Problem is on all vats 

  1. Final Step

Change filter pad

Check O-rings on suction tube - picture on this page

• Two O-rings should be present and they should be orange

• Picture on this page shows O-rings that need to be replaced

Open center door above filter pan

Locate grey motor

On right side back of motor

Press red button firmly

Retry repump

Final Step

Clean the  Oil Level sensor (OIB)

Check breakers and reset if needed - instructions here

Check power plugs

If issue persists and:

• Problem is on one vat 

  • Turn off vat and do not use that one vat

  • Final Step

• Problem is on all vats 

  • Final Step

If it is between 7am and 5pm:
Final Step

Outside those hours:
Final Step